Cold Press for Plywood
Advantage:
1. The surface roughness of our platen is 0.8μm. The better among the others is just 1.6μm. This will keep the pressing averagely. It can press steady even a piece of paper.
2. The pressure can be 50t, most of the pressure from other suppliers can only be 37-38t at most.
3. The cylinders we use are with 4 seals.
1st seal on the outside is dust against seal to keep dust out of the cylinders. 2nd seal is V type polyurethane seal. It is to hold the oils inside the cylinder. When lifting, the cylinders are dry and clean.
3rd seal is O type rubber seal. It is to keep the oil in the oil groove inside the cylinders.
4th seal is skeleton oil seal. The others use skeleton oil seal only.
4. Our machine base is type H steel. The beam is as whole part. Much stronger than the others with welded steel plate. Welded steel plate will be bent easily
Shipment
Other models
80tons 100tons
Separate platen Automatic Feeding
By Mia
Related News
The HT600A is designed to handle edge banding tape from 0.3mm to 3mm in thickness and 12mm to 60mm in width, with a workpiece thickness range of 10mm to 55mm. With a feeding speed
The wide belt sanding machine comes with three mainstream standard processing widths: 630mm, 1000mm and 1300mm. To accommodate personalized production requirements of different cus
The HT306Y integrates six core processing procedures: preheating, pre-milling, gluing, end cutting, fine trimming, scraping and polishing, to complete the full panel edge banding p
Core Configuration: 400mm Main Blade + 120mm Scoring Blade, Max Cutting Height 140mm
1. Reinforced Heavy-Duty Frame Guarantees Long-Term Stable Operation
The automatic curve edge banding machine adopts premium global electrical and pneumatic components for reliable and precise performance. It uses PLC touchscreen control following G
1. Flexible Customization to Meet Diverse Production Requirements
Designed specifically to solve the edge sealing challenges of large boards in compact production environments, the HT500 is a game-changer for manufacturers working with MDF, parti
The newly upgraded HT1000-4SY brush sanding machine adopts a humanized hand-cranked sanding frame structure, bringing outstanding operational flexibility and adjustability. Every s
Recently, the HOLZTECH HT600Y fullautomatic industrial edge banding machine, with its stable and reliable overall performance and upgraded quickchange dualgluepot configuration, ha
